Woodworking engraving machine is one of the important equipments in the wood processing industry today. It is highly efficient and well used to meet the needs of the industry. So what are the problems and problems encountered during the use of the device? Let's take a look at a few common faults and solutions.
1. The carving depth of the engraving machine is different.
When using the engraving machine, there will be inconsistencies in the depth of the engraving, which will affect the aesthetics of the engraving. So what should be done like this? The engraving varies in depth. It can be considered whether the control is faulty or loose. It can also be considered that the stepper motor is faulty, or there may be a problem with the inverter jammer. When encountering such inconsistencies in engraving, it is necessary to analyze the problem from multiple angles so as not to affect the later use effect of the device.
2, the engraving machine appears chaotic
If the wood engraving machine has a phenomenon of random engraving, this is the "garbled code" of the engraving machine itself, and the cause of the failure can be analyzed from multiple angles when used. It may be that the controller issues a card, or it may be a problem with the software itself, or the computer system is affected by a virus.
As a professional engraving machine manufacturer, woodworking engraving machine manufacturers can give different introductions. When operating and using, you need to pay attention to the reasons for analyzing the faults and ensure the long-term use of the equipment.
