FAG bearings should be noted when using

FAG bearings must be carefully used for precision parts in the case of rolling. No matter how high-performance bearings are used or improper effects, the expected high-performance form will not be obtained. There are several types of conditions that should be noted when using bearings.
1. When using the installation, the form of strong stamping should be carefully and carefully prohibited, and the form of the bearing directly hitting the bearing with the hammer is not allowed, and the form of the pressure transmitted by the rolling element is not allowed, and the effect can also be reflected in this aspect. Form, in order to be able to better show this effect.
2. Keep the bearing and its surrounding environment clean, even if tiny dust that is invisible to the naked eye enters the bearing, it will increase the wear, vibration and noise of the bearing. The bearings and their surrounding accessories should be kept clean, especially dust and dirt, and the tools and working environment must be kept clean.
3, to prevent the corrosion of the bearing, directly take the bearing by hand, you should wash away the sweat on your hands, and apply high-quality mineral oil before operation, especially in the rainy season and summer to pay attention to rust. However, under certain special operating conditions, bearings can achieve longer life than traditional calculations, especially at light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricant film and the surface damage caused by contaminants is limited. In fact, under ideal conditions, so-called permanent bearing life is possible.
4, use appropriate and accurate installation tools, try to use special tools, and try to avoid the use of cloth and short fibers.
FAG imported bearings can better see such effects after the performance of these four ways. If you change according to such conditions, then the cleaning method of the bearings has also changed a lot, so that you can slowly To reflect this effect, so the industry has also had a great transformation.

For more information and purchase please visit: https://www.supplyforever.com

How to properly clean KOYO bearings

When the KOYO bearing is removed for inspection, the appearance record is first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.

The cleaning of the bearings is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.

When rough washing, remove grease or adhesive with a brush or the like in the oil. At this time, if the bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.

When cleaning, the bearing is slowly rotated in the oil and must be carefully carried out.

The cleaning agent generally used is a neutral non-aqueous diesel oil or kerosene, and a warm alkali liquid or the like is sometimes used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean.

How to properly clean KOYO bearings:

1. When the bearing is removed and inspected, first take a look at the appearance with photography.

2. In addition, confirm the amount of lubricant remaining and sample the lubricant before cleaning the bearing.

3. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.

For more information and purchase please visit: https://www.supplyforever.com