How to extend the life of laser engraving machine laser tube

With the use of laser engraving machines, people are accustomed to using laser equipment in many places, but with the use of everyone, some problems will arise. Some equipments are impossible to use because of the revenue problems they generate. Expensive imported laser tube, so after a period of use, the laser tube will be aging, and the performance of the corresponding laser equipment will also be reduced. Jinan Lujiao takes us to see how to effectively prevent the aging of the laser tube. .
For example, the laser woodworking engraving machine that we often use, after a period of time, the power of the laser tube will become low after aging, and some things will not be cut if the speed is slowed down. It is inevitable that the laser tube will age after use. All we can do is slow down its aging and prolong the use of the activated tube.
1. Minimize the power used when the cutting requirements can be met.
2. Minimize the number of times the laser is turned on and off.
3. Turn off the laser during non-working hours.
4. Try to ensure that the temperature and humidity of the workplace meet the requirements for equipment use.
5. Do not operate the equipment for an extended period of time. As mentioned above, if we pay attention to the above problems in the process of using laser equipment, we can maximize the service life of laser products.

How to deal with the phenomenon of knives in woodworking engraving machines

Woodworking engraving machines may encounter various kinds of processes during processing, and the knives are an unexpected situation. Engraving machine knives refer to the sudden insertion of the tool into the workpiece during the movement, resulting in knife damage, scrapping of the workpiece and even impairing the accuracy of the machine. Avoid knives during processing.
When the engraving machine runs the knives, immediately press the emergency stop switch button on the machine to terminate the current machining. Check if the workpiece is scrapped, and then run the spindle for about 2 hours according to the spindle running-in procedure. If the tool is a serious tool, check whether the accuracy of the machine is damaged. If the accuracy is impaired, let the engraving machine manufacturer handle it.
The reason for the occurrence of the knives is generally misoperation, machining program problems and machine tool failures. Therefore, one of the checks for each link in the operation is to avoid misoperation, and to perform path overcut analysis in the path variant to avoid knives. The path appears. At the same time, to ensure the power environment of the CNC engraving machine and the stability of the control computer, these two are important causes of machine tool failure.