When the engraving machine is in use, it is to be cleaned, especially the woodworking engraving machine. why? Because it is easy to produce wood chips when using the engraving machine, it is easy to block if it is not cleaned before reuse, thus affecting the use effect of the engraving machine. So how should this engraving machine be cleaned up?
Woodworking machine manufacturers recommend that everyone, the most important part of the cleaning is the slide of the machine tool. Because the wood block is fixed on the machine when the engraving machine is working, it is easy to produce various kinds of wood chips on the machine tool when engraving, and then fall on the slide of the machine tool, causing the problem of blockage. Therefore, when cleaning the engraving machine, it is possible to focus on cleaning the slides on both sides of the machine to ensure that no wood chips are stuck inside, which affects the use of the engraving machine.
In addition to the machine's slides need to clean wood chips, other gears and slides should also check for wood residue, if any, in time. When the engraving machine is designed, there are many gears and slides. These places are easily caught by wood chips. Therefore, it is necessary to check and clean these places in time to ensure the use of the machine. However, the cleaning of these places does not need to be too frequent, and it can be checked once in a while. The machine tool must be cleaned after each engraving.
